Joint properties and microstructure of diffusion-bonded grade 2 titanium to AISI 430 ferritic stainless steel using pure Ni interlayer

Basit Öğe Kaydı
dc.authoridKAHRAMAN, NIZAMETTIN/0000-0002-7152-3795
dc.authoridkaya, yakup/0000-0002-9951-2844
dc.contributor.authorYildiz, Aydan
dc.contributor.authorKaya, Yakup
dc.contributor.authorKahraman, Nizamettin
dc.date.accessioned2024-09-29T15:50:56Z
dc.date.available2024-09-29T15:50:56Z
dc.date.issued2016
dc.departmentKarabük Üniversitesien_US
dc.description.abstractDiffusion welding/bonding has been successfully used to joint dissimilar metals widely. In this study, pure Ti and AISI 430 ferritic stainless steel plates were joined through diffusion welding using a Ni interlayer at various temperatures (800, 825, 850 and 875 A degrees C), holding times (15, 30, 60 and 120 min) and under a constant pressure (3 MPa) under argon shielding media. The welded joints were subjected to tensile-shear tests and hardness tests in order to determine their interfacial strength. In addition, microstructural properties of the joined interface were examined using optical and scanning electron microscope (SEM). The tensile-shear test results showed that the fractures occurred mostly in the interface of the Ni-ferritic stainless steel web at lower temperatures. It was seen from the hardness results that the highest hardness value was obtained for the titanium side and the hardness values increased with increasing welding temperature and holding time. SEM/EDS examinations showed that the diffused atoms and diffusion distance increased depending on the increasing temperature and holding time.en_US
dc.description.sponsorshipKarabuk University [KBU-BAP-13/1-YL-025]en_US
dc.description.sponsorshipThe authors gratefully acknowledge the financial support from the Karabuk University Project (KBU-BAP-13/1-YL-025).en_US
dc.identifier.doi10.1007/s00170-015-8244-2
dc.identifier.endpage1298en_US
dc.identifier.issn0268-3768
dc.identifier.issn1433-3015
dc.identifier.issue5-8en_US
dc.identifier.scopus2-s2.0-84953229483en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1287en_US
dc.identifier.urihttps://doi.org/10.1007/s00170-015-8244-2
dc.identifier.urihttps://hdl.handle.net/20.500.14619/3810
dc.identifier.volume86en_US
dc.identifier.wosWOS:000383084300015en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer London Ltden_US
dc.relation.ispartofInternational Journal of Advanced Manufacturing Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectIntermetallicsen_US
dc.subjectJoiningen_US
dc.subjectStainless steelen_US
dc.subjectTitaniumen_US
dc.subjectDiffusion bondingen_US
dc.titleJoint properties and microstructure of diffusion-bonded grade 2 titanium to AISI 430 ferritic stainless steel using pure Ni interlayeren_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu