Microstructure and dry sliding wear properties of 3Si-2Ni and 3Si-2Mn powder metallurgy steels with different graphite content

Basit Öğe Kaydı
dc.authoridTEKELI, SULEYMAN/0000-0001-9826-6875
dc.contributor.authorTekeli, S.
dc.contributor.authorGural, A.
dc.contributor.authorOzyurek, D.
dc.date.accessioned2024-09-29T16:05:04Z
dc.date.available2024-09-29T16:05:04Z
dc.date.issued2011
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, plain iron powder (ASC.100.29) was mixed with 0.35-1.1 % graphite + 3 % Si + 2 % Ni and 0.35-1.1 % graphite + 3 % Si + 2 % Mn powders. While coarse pearlitic structure with homogeneous distribution of Mn was obtained in Mn-added specimens, Ni-rich austenitic areas with divorced pearlite structure were observed in Ni-added specimens. Wear tests were carried out at a load of 50 N. The experimental results showed that the highest wear resistance was obtained in the Ni-added specimen. While subsurface brittle cracking caused more wear in the Mn-added specimens, the wear occured by plastic deformation of surface Ni-added specimens.en_US
dc.description.sponsorshipGazi University [07/2005-24]en_US
dc.description.sponsorshipThis study has been supported by the Scientific Research Project program (BAP) of Gazi University (under project number 07/2005-24).en_US
dc.identifier.doi10.1177/1350650111405255
dc.identifier.endpage820en_US
dc.identifier.issn1350-6501
dc.identifier.issn2041-305X
dc.identifier.issueJ8en_US
dc.identifier.scopus2-s2.0-80052799021en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage814en_US
dc.identifier.urihttps://doi.org/10.1177/1350650111405255
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6488
dc.identifier.volume225en_US
dc.identifier.wosWOS:000294023800012en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSage Publications Ltden_US
dc.relation.ispartofProceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectiron powderen_US
dc.subjectalloying elementsen_US
dc.subjectsinteringen_US
dc.subjectmicrostructureen_US
dc.subjectdry sliding wearen_US
dc.titleMicrostructure and dry sliding wear properties of 3Si-2Ni and 3Si-2Mn powder metallurgy steels with different graphite contenten_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu