The effects of retrogression parameters in RRA treatment on tensile strength of 7075 aluminium alloys

Basit Öğe Kaydı
dc.contributor.authorÖzyürek, D.
dc.contributor.authorYilmaz, R.
dc.contributor.authorKibar, E.
dc.date.accessioned2024-09-29T16:22:13Z
dc.date.available2024-09-29T16:22:13Z
dc.date.issued2012
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study retrogression and re-aging (RRA) treatments has been applied on 7075 aluminium alloys after T6 treatment. The alloys were retrogressed at various temperatures and times in the retrogression stage of RRA treatment. The effects of the parameters mentioned above on tensile strengths and % elongations were investigated. Besides fracture surfaces were examined by scanning electron microscopy (SEM) for determination of the effects of retrogression temperatures and times on fracture mechanism. The alloy retrogressed at 220°C for 60 minutes showed the highest tensile strength values, on the other hand, the lowest elongation values. Strong relationship has been seen between hardness and tensile strength; however, no effective relationship for elongation was available. Retrogression temperatures and times affects on microstructure of the alloys, therefore, it has also great influence on the hardness and tensile strength, elongation and fracture mechanism.en_US
dc.identifier.endpage203en_US
dc.identifier.issn1300-1884
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-84859294668en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage193en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9907
dc.identifier.volume27en_US
dc.indekslendigikaynakScopusen_US
dc.language.isotren_US
dc.relation.ispartofJournal of the Faculty of Engineering and Architecture of Gazi Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAgingen_US
dc.subjectAluminium alloys 7075en_US
dc.subjectElongationen_US
dc.subjectRe-agingen_US
dc.subjectRetrogressionen_US
dc.subjectTensile strengthen_US
dc.titleThe effects of retrogression parameters in RRA treatment on tensile strength of 7075 aluminium alloysen_US
dc.title.alternativeRRA işleminde yeniden çözeltiye alma parametrelerin 7075 alüminyum alaşimlarinin çekme dayanimina etkisien_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu