The Effect of ?2-Phase (Ti3Al) on the Wear Behavior of Titanium Alloys Added Small Amounts of Fe
Küçük Resim Yok
Tarih
2017
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Polish Acad Sciences Inst Physics
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
In the present study, the effect of alpha(2)-phase (Ti3Al) on the wear behavior of the titanium alloys is investigated by adding different amounts of (0.3-0.5%) Fe to the Ti8Al2.5Sn and Ti5Al2.5Sn alloys, which are produced by the mechanical alloying. The pre-formed green compacts were sintered at 1200 degrees C for one hour. The sintered samples were characterized by scanning electron microscope, X-ray diffraction, and the hardness and density measurements. The wear tests were performed under 30 N load, at four different sliding distances (400-1600 m) and with a constant speed of 1 ms(-1). As a result of the study, it was understood that the alpha(2)-phase (Ti3Al) in the structure occurred at the grain boundary during the sintering process. With an increase in Fe addition to the Ti8Al2.5Sn and Ti5Al2.5Sn alloys, the density and hardness of the alloy increased as well. As a result of the wear tests, it was determined that the least weight loss occurred in Ti5Al2.5Sn alloy with a 0.5% Fe addition.
Açıklama
6th Congress and Exhibition on International Advances in Applied Physics and Materials Science (APMAS) -- JUN 01-03, 2016 -- Istanbul, TURKEY
Anahtar Kelimeler
Kaynak
Acta Physica Polonica A
WoS Q Değeri
Q3
Scopus Q Değeri
Q4
Cilt
131
Sayı
1
