The Effect of ?2-Phase (Ti3Al) on the Wear Behavior of Titanium Alloys Added Small Amounts of Fe

Basit Öğe Kaydı
dc.authoridSimsek, Ijlal/0000-0001-6542-8567
dc.contributor.authorSimsek, I.
dc.contributor.authorOzyurek, D.
dc.date.accessioned2024-09-29T16:05:13Z
dc.date.available2024-09-29T16:05:13Z
dc.date.issued2017
dc.departmentKarabük Üniversitesien_US
dc.description6th Congress and Exhibition on International Advances in Applied Physics and Materials Science (APMAS) -- JUN 01-03, 2016 -- Istanbul, TURKEYen_US
dc.description.abstractIn the present study, the effect of alpha(2)-phase (Ti3Al) on the wear behavior of the titanium alloys is investigated by adding different amounts of (0.3-0.5%) Fe to the Ti8Al2.5Sn and Ti5Al2.5Sn alloys, which are produced by the mechanical alloying. The pre-formed green compacts were sintered at 1200 degrees C for one hour. The sintered samples were characterized by scanning electron microscope, X-ray diffraction, and the hardness and density measurements. The wear tests were performed under 30 N load, at four different sliding distances (400-1600 m) and with a constant speed of 1 ms(-1). As a result of the study, it was understood that the alpha(2)-phase (Ti3Al) in the structure occurred at the grain boundary during the sintering process. With an increase in Fe addition to the Ti8Al2.5Sn and Ti5Al2.5Sn alloys, the density and hardness of the alloy increased as well. As a result of the wear tests, it was determined that the least weight loss occurred in Ti5Al2.5Sn alloy with a 0.5% Fe addition.en_US
dc.description.sponsorshipKarabuk University Scientific Research Projects Department [KBU-BAP-15/2-DR-026]en_US
dc.description.sponsorshipThe authors are pleased to acknowledge the financial support for this study from Karabuk University Scientific Research Projects Department (KBU-BAP-15/2-DR-026).en_US
dc.identifier.doi10.12693/APhysPolA.131.99
dc.identifier.endpage101en_US
dc.identifier.issn0587-4246
dc.identifier.issn1898-794X
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85016201448en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage99en_US
dc.identifier.urihttps://doi.org/10.12693/APhysPolA.131.99
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6583
dc.identifier.volume131en_US
dc.identifier.wosWOS:000396118600029en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherPolish Acad Sciences Inst Physicsen_US
dc.relation.ispartofActa Physica Polonica Aen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleThe Effect of ?2-Phase (Ti3Al) on the Wear Behavior of Titanium Alloys Added Small Amounts of Feen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu