Manufacturing of Wear Resistant Iron-Steel: A Theoretical and Experimental Research on Wear Behavior
Küçük Resim Yok
Tarih
2021
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Eos Assoc
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
In this study, four different alloys of steel blocks with a thickness of 15mm were manufactured in order to develop an alternative to steel plates used in wear exposed areas of construction machines, trucks, and asphalt production plants. To further increase the wear resistance of the manufactured steel blocks, their thickness was reduced to 10mm by the hot-rolling method. Wear specimens were obtained from rolled blocks. These specimens were abraded at 20N, 40N, and 60N loads in reciprocating linear motion module ASTM G-33 standards to determine their wear resistance. SEM and EDX analyses were also conducted to see modifications on the worn surfaces. In addition, a theoretical model of wear behaviors was created, calculations were made with Archard wear equation and ANSYS software, and the theoretical and experimental results were compared.
Açıklama
Anahtar Kelimeler
steel plates, wear, hot rolling, Archard wear analysis
Kaynak
Engineering Technology & Applied Science Research
WoS Q Değeri
N/A
Scopus Q Değeri
N/A
Cilt
11
Sayı
3
