Manufacturing of Wear Resistant Iron-Steel: A Theoretical and Experimental Research on Wear Behavior

Basit Öğe Kaydı
dc.authoridYasar, Mustafa/0000-0001-9354-3554
dc.contributor.authorBildik, Oguzhan
dc.contributor.authorYasar, Mustafa
dc.date.accessioned2024-09-29T16:09:36Z
dc.date.available2024-09-29T16:09:36Z
dc.date.issued2021
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, four different alloys of steel blocks with a thickness of 15mm were manufactured in order to develop an alternative to steel plates used in wear exposed areas of construction machines, trucks, and asphalt production plants. To further increase the wear resistance of the manufactured steel blocks, their thickness was reduced to 10mm by the hot-rolling method. Wear specimens were obtained from rolled blocks. These specimens were abraded at 20N, 40N, and 60N loads in reciprocating linear motion module ASTM G-33 standards to determine their wear resistance. SEM and EDX analyses were also conducted to see modifications on the worn surfaces. In addition, a theoretical model of wear behaviors was created, calculations were made with Archard wear equation and ANSYS software, and the theoretical and experimental results were compared.en_US
dc.description.sponsorshipUniversity of Karabuk Coordinatorship of Research Projects [KBUBAP-17-DR-271]en_US
dc.description.sponsorshipThe work presented in this paper was supported by the University of Karabuk Coordinatorship of Research Projects under Project No. KBUBAP-17-DR-271.en_US
dc.identifier.doi10.48084/etasr.4092
dc.identifier.endpage7256en_US
dc.identifier.issn2241-4487
dc.identifier.issn1792-8036
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85175113965en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage7251en_US
dc.identifier.urihttps://doi.org/10.48084/etasr.4092
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7661
dc.identifier.volume11en_US
dc.identifier.wosWOS:000661413500030en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherEos Assocen_US
dc.relation.ispartofEngineering Technology & Applied Science Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectsteel platesen_US
dc.subjectwearen_US
dc.subjecthot rollingen_US
dc.subjectArchard wear analysisen_US
dc.titleManufacturing of Wear Resistant Iron-Steel: A Theoretical and Experimental Research on Wear Behavioren_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu