The influence of the heat treatment on mechanical and microstructure properties of Fe-Mn-C high-manganese steel

Basit Öğe Kaydı
dc.contributor.authorAkinay, Y.
dc.contributor.authorHayat, F.
dc.date.accessioned2024-09-29T16:16:10Z
dc.date.available2024-09-29T16:16:10Z
dc.date.issued2016
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe influence of the heat treatment on mechanical properties and microstructures of the Fe-22Mn-0.6C high-manganese steel was investigated at different annealing temperatures. A high-Mn TWIP (Twinning Induced Plasticity) steel specimens (0.6C, 24Mn steel) were fabricated, and were annealed at 700, 900 and 1100 C for 150 min and then air-cooled. The carbide precipitates in the microstructure of specimens were annealed at 700 C. However, the microstructure of specimens annealed at 900 and 1100°C is austenite and some grains include annealing and mechanical twins. The results show that tensile strength of the material decreased, and the ductility of material was improved with increasing annealing temperature. Besides that, hardness value decreased between 700 and 1100 C, which shows a good agreement with the equilibrium dissolution temperature of M3C carbides.en_US
dc.identifier.doi10.4149/km-2016-2-91
dc.identifier.endpage96en_US
dc.identifier.issn0023-432X
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-84964579575en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage91en_US
dc.identifier.urihttps://doi.org/10.4149/km-2016-2-91
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8892
dc.identifier.volume54en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSlovenska Akademia Vieden_US
dc.relation.ispartofKovove Materialyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCold rollingen_US
dc.subjectHeat treatmenten_US
dc.subjectHigh-manganese steelen_US
dc.subjectMicrostructureen_US
dc.subjectSemen_US
dc.subjectTWIP steelen_US
dc.titleThe influence of the heat treatment on mechanical and microstructure properties of Fe-Mn-C high-manganese steelen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu