Turning of (Cu-Cr-Zr) alloy with abrasive water jet

Basit Öğe Kaydı
dc.contributor.authorKartal, F.
dc.contributor.authorGokkaya, H.
dc.contributor.authorNalbant, M.
dc.date.accessioned2024-09-29T16:22:09Z
dc.date.available2024-09-29T16:22:09Z
dc.date.issued2012
dc.departmentKarabük Üniversitesien_US
dc.descriptionVLN; Pratt and Whitney; Best High Pressure and Drilling Technology (BHDT); Barton; Gowlingsen_US
dc.description21st International Conference on Water Jetting: Looking to the Future, Learning from the Past -- 19 September 2012 through 22 September 2012 -- Ottawa, ON -- 95138en_US
dc.description.abstractIn this research, the effect of the processing parameters on surface roughness during the turning of (Cu-Cr-Zr) alloy with abrasive water jet was studied. In the experimental studies, (Cu-Cr-Zr) alloy, ?30 and 240 mm in size, was processed with abrasive water. In the experiment, pump pressure was 350 MPa, in the form of garnet abrasive and 80 mesh in size and nozzle diameter were kept constant at 1.2 mm. In addition to that in the parameters of nozzle feed rates (10, 15, 20 and 25 mm/min), abrasive flow rates (50, 150, 250 and 350 gr/min) and nozzle distances (2, 5, 8, 11 mm) were used in the tests. According to the results of the experiment, the increase in nozzle feed rate and nozzle distance lead to increase in average surface roughness. On the other hand, the increase in the number of turning speed and abrasive flow rate lead to decrease in average surface roughness. Average surface roughness was measured between 2.5 and 5.5 ?m. © BHR Group 2012 Water Jetting 21.en_US
dc.identifier.endpage288en_US
dc.identifier.isbn978-185598131-7
dc.identifier.scopus2-s2.0-84872812048en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage281en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9857
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofBHR Group - 21st International Conference on Water Jetting: Looking to the Future, Learning from the Pasten_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subject(Cu-Cr-Zr) alloyen_US
dc.subjectAbrasive water jeten_US
dc.subjectAverage surface roughnessen_US
dc.subjectLatheen_US
dc.titleTurning of (Cu-Cr-Zr) alloy with abrasive water jeten_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu