Abrasive wear behaviour of cast Al-Si-Mn alloys

Basit Öğe Kaydı
dc.authoridcetin, Melik/0000-0002-6952-2523
dc.contributor.authorCetin, Melik
dc.date.accessioned2024-09-29T16:05:01Z
dc.date.available2024-09-29T16:05:01Z
dc.date.issued2019
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this paper, the effect of manganese (wt%) and size of the Al2O3 abrasive grains of abrasive wear behaviours of Al-Si-(0.16-0.76%) Mn alloy was examined. Abrasive wear experiments were conducted against abrasive Al2O3 paper grains with diameters in the variety of 38-250 mu m, under the normal load range of 10, 20 and 30 N and the sliding velocity of 0.1 m s(-1). Wear measurements have shown that the wear rate of the material is dependent on the manganese content and the abrasive grain size. The best wear resistance is in the content of 0.73 Mn, which is associated with increased toughness and strength. The Al-Si casting alloy which had 0.73% Mn content exhibited lower wear rate than the Al-Si-0.16/0.22/0.23% Mn alloys after scoured on fine abrasive Al2O3 grains (<65 mu m). Wear experiments achieved on Al2O3 grains having sizes greater than 65 mu m revealed that, the cast Al-Si- alloy which had 0.73% Mn content had lower wear rate than the cast Al-Si-0.16/0.22/0.23% Mn alloys.en_US
dc.identifier.doi10.1177/0954408918818735
dc.identifier.endpage918en_US
dc.identifier.issn0954-4089
dc.identifier.issn2041-3009
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85059683239en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage908en_US
dc.identifier.urihttps://doi.org/10.1177/0954408918818735
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6458
dc.identifier.volume233en_US
dc.identifier.wosWOS:000476541000019en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSage Publications Ltden_US
dc.relation.ispartofProceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectWearen_US
dc.subjectAl-Si alloyen_US
dc.subjectmanganese (wt%)en_US
dc.subjectabrasionen_US
dc.subjectgrain size abrasivesen_US
dc.titleAbrasive wear behaviour of cast Al-Si-Mn alloysen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu