Optimization of the Machinability of Aluminum 6082 Alloy by Brass Electrode

Basit Öğe Kaydı
dc.contributor.authorKalyon, A.
dc.date.accessioned2024-09-29T16:16:20Z
dc.date.available2024-09-29T16:16:20Z
dc.date.issued2019
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, the machinability of Aluminium 6082 alloy with brass electrode was investigated in the electro discharge machine. In the experimental study, Taguchi L9 orthogonal array experimental set was used. As the processing parameter, discharge current, pulse duration and waiting period were used. As a result of the machinability tests, the average surface roughness, material removal rate and electrode wear rate were investigated. Taguhci technique was used to determine the optimum cutting parameters. The effect of control factors on experimental results was calculated by using variance analysis. As a result of the experimental study, the most effective parameter on average surface roughness, material removal rate and electrode wear rate was determined as discharge current. It was found that the increase in discharge current negatively affects the average surface roughness and causes the electrode to worn more. Factors affecting the average surface roughness were calculated as discharge current 78.73%, pulse duration 15.78% and waiting period 1.8%. It was determined that the pulse duration and waiting period were not significant on the average surface roughness. © 2019, TUBITAK. All rights reserved.en_US
dc.identifier.doi10.31202/ecjse.459495
dc.identifier.endpage130en_US
dc.identifier.issn2148-3736
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85095958186en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage118en_US
dc.identifier.trdizinid386041en_US
dc.identifier.urihttps://doi.org/10.31202/ecjse.459495
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/386041
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9015
dc.identifier.volume6en_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isotren_US
dc.publisherTUBITAKen_US
dc.relation.ispartofEl-Cezeri Journal of Science and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAluminumen_US
dc.subjectBrassen_US
dc.subjectElectro erosionen_US
dc.subjectRoughnessen_US
dc.subjectTaguchien_US
dc.titleOptimization of the Machinability of Aluminum 6082 Alloy by Brass Electrodeen_US
dc.title.alternativeAlüminyum 6082 Alaşımının Pirinç Elektrot İle İşlenebilirliğinin Optimizasyonuen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
TR-Dizin İndeksli Yayınlar Koleksiyonu