Tensile test specimen preparing three different cutting method influence on the AA 6061-T6

Basit Öğe Kaydı
dc.contributor.authorKartal, F.
dc.contributor.authorGokkaya, H.
dc.contributor.authorYerlikaya, Z.
dc.contributor.authorPolat, R.
dc.date.accessioned2024-09-29T16:22:05Z
dc.date.available2024-09-29T16:22:05Z
dc.date.issued2014
dc.departmentKarabük Üniversitesien_US
dc.descriptionAir France; Best High Pressure and Drilling Technology (BHDT); et al.; OMAX Corporation; TST; VLN Advanced Technologies Incen_US
dc.description22nd International Conference on Water Jetting 2014: Advances in Current and Emerging Markets -- 3 September 2014 through 5 September 2014 -- Haarlem -- 110163en_US
dc.description.abstractAluminum 6061 (T6) material which is widely used in aviation and defense industries was treated with tensile test in this study. The samples for tensile test were manufactured using three production methods (namely, milling, CO2laser and abrasive water jet (AWJ). Following the tests sample surfaces were assessed for their surface roughness values. Samples which meet the TS EN ISO 6892-1 standard were assessed for their tensile strength, yield strength, percentage elongation and constriction. Among the test samples, sample prepared by milling proved to provide the best surface roughness value (1.32 ?m). The highest tensile strength was obtained from the sample prepared using AWJ while the lowest was obtained from the sample prepared using laser cutting. Samples prepared using abrasive water jet showed 6.57 % difference in terms of tensile strength from samples prepared using milling. © BHR Group 2014 Water Jetting 22.en_US
dc.description.sponsorshipBritish Association for Psychopharmacology, (KUBAP-04/2012-01)en_US
dc.identifier.endpage81en_US
dc.identifier.isbn978-163439443-7
dc.identifier.scopus2-s2.0-84922837737en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage75en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9813
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherBHR Group Limiteden_US
dc.relation.ispartofBHR Group - 22nd International Conference on Water Jetting 2014en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAbrasive water jet (AWJ)en_US
dc.subjectAluminum 6061-t6en_US
dc.subjectLaser cuttingen_US
dc.subjectMillingen_US
dc.subjectTensile testen_US
dc.titleTensile test specimen preparing three different cutting method influence on the AA 6061-T6en_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu